a-4 apem www.apem.com a smt tl series surface mount tiny washable toggle switches distinctive features and specifications ? entirely designed for surface mount ? tape and reel packaging ? reflow solderable ? high temperature plastic materials ? tin plated ground plate ? terminal coating : tin alloy over nickel plating ? terminals turned to the outside, preventing the shadow effect in infrared soldering and permitting visual inspection of solder joints ? distance between case and circuit : 0,55 mm (.021) ? end stackable with 10,16 mm (.40) pitch ? available with positioning pins to ensure switch orientation during the reflow process and increasing switch mechanical resistance ? protected against electrostatic discharges (esd) up to 10 kv ? washable construction withstands cleaning processes, including hot water under pressure electricalspecifications ? max. current/voltage rating with resistive load : 0,4va 20v max. ac or dc ? minimum load : 10ma 50mv or 10a 5vdc ? initial contact resistance : 20 m max ? insulation resistance : 1.000 m min. at 500vdc ? dielectric strength : 1.000 vrms. 50 hz min. between terminals and frame 500 vrms. 50 hz min. between terminals ? electrical life at full load : - 2 position switches : 60.000 cycles - 3 position switches : 30.000 cycles ? static resistance : 10 kv (schaffner equipment) generalspecifications ? operating temperature : -40c to +85c ? moisture resistance : 21days per iec 512-6 test 11c ? vibration resistance : 10-500 hz / 10 g per iec 512-4 test 6d ? shock resistance : 50 g per iec 512-4 test 6c materials ? case : high temperature plastic material ul94-v0 ? actuator : brass, nickel plated, with high temperature ul94-v0 plastic cap ? ground plate and positioning pins : steel, tin plated ? contacts : brass, gold plated ? terminals : brass, with pure tin plating over nickel barrier solderingandcleaning ? reflow soldering : infrared, vapor phase or infrared convection ? washable per iea-rs448-2 : - water + detergent - preferred - solvents ? further information on reflow soldering : see end of catalogue. packaging standard packaging unit : 700 pieces tape meeting international standard iec - publication 286-3 (eia481a) start leader : 400 mm min. unrolling direction tape width 24.00 (.944) 44.00 (1.732) reel (dimension a) 24.40+2.00/0.00 (.960+.078/.000) 44.40+2.00/0.00 (1.748+.078/.000) ?13.000.25 (.511 dia.009) ?360.00 maxi (14.173 dia max) (3.937 dia min) ?100.00 mini 3.00 (.118) (1.590.003) (1.732.011) (.472) 40.400.10 44.000.30 12.00 a dimensions : first dimensions are in mm while inches are shown as bracketed numbers. 02-serie smt tl-a_02-serie smt tl-a 21/11/12 11:53 page4
apem www.apem.com a-5 a smt tl series surface mount tiny washable toggle switches ? with or without positioning pins ? single pole also available for vertical mounting. on request. (.120) 3.05 5.55 (.218) without positioning pins iii ii i tl36ws84000 on - on tl39ws84000 on off on tl37ws84000 mom off mom tl38ws84000 on off mom tl32ws84000 on - mom (.149) (.165) (.181 dia) (.196 dia) (.318) (.019) 0.50 8.10 ?5.00 ?4.60 4.20 3.80 321 (.400) (.202) (.120) (.218) 10.16 5.15 5.55 3.05 1.80 (.070) 2.10 (.082) 7.96 (.313) 1.50 (.059) 0.80 (.031) 2.54 (.100) 2.54 (.100) (.271) 6.90 ?2.40 (.094 dia) 5.50 (.216) 24 ii iii i with positioning pins iii ii i TL36WS84065 on - on tl39ws84065 on off on tl37ws84065 mom off mom tl38ws84065 on off mom tl32ws84065 on - mom (.165) (.196 dia) (.318) (.019) 0.50 8.10 ?5.00 4.20 321 (.400) (.202) (.120) (.218) 10.16 5.15 5.55 3.05 2.54 (.100) (.039) (.372) 1.00 9.45 (.094 dia) ?2.40 3.80 (.149) 24 (.216) 5.50 (.181 dia) ?4.60 (.150) 3.81 5.08 (.200) 0.80 (.031) (.059) 1.50 (.082) (.313) 2.10 7.96 (.070) 6.90 (.271) 1.80 (.150) 3.81 (.025) 0.65 ?0.80 (.031 dia) i iiiii 1 2 3 02-serie smt tl-a_02-serie smt tl-a 21/11/12 11:53 page5
|
